Welded Wire Fence can be made of superior quality welded mesh, electro galvanized, hot-dipped galvanized or plastic coated. It is also supplied in plain steel without galvanizing to save cost.
 
Welded Wire Fence is usually used to contain pets or as a temporary barrier to keep animals out of gardens. The material is available from 3' to 6' high in 25' to 50' rolls. Like chain link fencing it's also available with a vinyl coating, usually green or brown. When used with rail fencing, welded wire can make an effective pet containment fence for large areas..

The raw material for the manufacture of panels is the wire through cold rolling or by wire drawing using the hot-rolled wire produced in the steelworks.

Welded Wire Fence are determined by several data:
Wire Diameter;
Surface Treatment;
Tensile Breaking Strength;
Elongation;
Panel Length and Width

General purpose fencing offers strength and rigidity for a variety of outdoor projects. Galvanized wire and solid welded construction gives this fence strength and rigidity. Sturdy construction for dog kennels and small animal pens

Welded Wire Fence is available in 2"x4" mesh, 1"x2" mesh, or 1"x1" mesh.

Steellong could supply Galvanized Welded Wire Fencing ,Welded Fencing ,Decorative Garden Fencing ,Welded Wire Fence Panels,Welded Mesh Fencing ,Pvc Coated Welded Mesh Fence

Some Standard Panel Sizes:
1.5mm Wire Diameter, 1/2" X 1/2" Mesh Opening;
2mm Wire Diameter, 1" X 1" Mesh Opening;
3mm Wire Diameter, 1" X 1" Mesh Opening;
3mm Wire Diameter, 1-1/4" X 1-1/4" Mesh Opening;
4mm Wire Diameter, 1-1/2" X 1-1/2" Mesh Opening;
2mm Wire Diameter, 2" X 2" Mesh Opening;
3mm Wire Diameter, 2" X 2" Mesh Opening;
4mm Wire Diameter, 2" X 2" Mesh Opening;
5mm Wire Diameter, 2" X 2" Mesh Opening;
6mm Wire Diameter, 4" X 2" Mesh Opening;
Special sizes can be custom made.

The two basic metal types: Alloy Type 304 and Type 316

T304 is the basic stainless alloy, and unless otherwise specified it is assumed that this type is acceptable. Also called 18-8 due to 18% chromium and 8% nickel. T304 melts at 2600 degrees F (1430 C) but its maximum recommended temperature for continuous service is 1450 degrees F. (790 C) and is useful for intermediate service up to 1650 degrees F (900 C). Its' uses include: sorting and screening of abrasives, liquids, powders and other solids. It is the less expensive alloy but not as corrosion resistant as T316. It is the slightly stronger of the two types.
Type 316 is a special stainless alloy due to the addition of 2% molybdenum. This increases its resistance to corrosion by salts, acids and seawater. Also called 18-10 due to 18% chromium and 10% nickel. T316 melts at 2500 degrees F (1375 C) but its maximum recommended temperature for continuous service is 1500 degrees F. (815 C) and is useful for intermediate service up to 1650 degrees F (900 C). Its' uses include: processing of oils and foods, chemicals, and pharmaceuticals.
Welded Stainless Wire Mesh - Examples of Uses
Rodent proofing
Cages
Food drying
Reinforcement
Stainless Steel Barbeque Grills (2 inch Mesh .105)
Insulation containment /installation
Soffitt screens
Marine uses
Rodent proofing (for high end buildings or situation where coorosion is problematic for galvanized)
Cages (Unless special arrangement is made we cannot gaurentee that our mesh spacing is accurate enough to be called "cage quality")
Food drying
Reinforcement
Insulation containment (1 mesh .022 & 2 mesh .022)
Marine uses (T316 alloy)
Air vents and inlets
Chimney Spark arrestors (2 mesh .063, but we recommend you check local building codes)
Welded Stainless Wire Mesh - Cutting
Stainless steel welded mesh with a .022 wire diameter can be cut with heavy scissors. Wire diameters up to about .047 can be cut with tin snips. Wire diameters over .047 inches are difficult to cut with hand tools but a compound aircraft-style hand shear can usually nibble its way through. The heavy wires of .063, .080, and .120 should be cut with a small bolt cutter or a hacksaw.